DSLRKIT Power Switch Button - Male to Female TYPE-C

The USB type C male to female power cable is a full-core cable support the PD fast charging protocol, Max 5A current, Supports 5V-20V voltage. Supports PD fast charging protocol of RPi 27W USB-C Power Supply. Turn RPi5 or RPi4 on or off through the cable Power Switch Button. Support Type-C 3.1 gen2 10Gbps Data transmission. Supports connection to a USB-C interface monitor, supporting up to 3840x2160 60hz resolution. Item Included: PD USB TYPE-C Male to Female Cable with Power Switch Button x1 Notice After starting the RPi5 with the official Raspberry Pi 27W power supply through this switch line, the system will not recognize the power supply correctly.USB booting may be affected as a result, and the current consumption of USB peripherals will be limited to 600mA. The solution is: sudo nano /boot/firmware/config.txt to add usb_max_current_enable=1 In addition, the screen warns: "This power supply is not capable of supplying 5A Power to peripherals will be restricted", which can be solved by the following methods: sudo rpi-eeprom-config --edit to add PSU_MAX_CURRENT=5000