Saramonic SmartRig+ Di XLR+Lightning Microphone

Overview The SmartRig+ Di makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera or video camera. 2 independent channels allow you to connect and control gain on multiple microphones or guitars at the same time. The interface also features 3 types of input to accommodate any set up: two XLR mic inputs, two 1/4\ (6.35mm) guitar inputs, and two 1/8\ (3.5mm) jack inputs for connecting any instrument or microphone. Features a MFi Certified Lightning Output Connector allowing you to attach an XLR microphone or 6.3mm guitar directly to your lighting connected iOS device. Provides 48V phantom power for microphones, and includes a 3.5mm headphone output for real-time sound monitoring. The two gain control thumbwheels make it easy to set precise levels. Toggle between Mono and Stereo output modes as necessary. Powered by one 9V battery. Features 2 Independent Channels Two XLR Microphone Inputs Two 3.5mm (TRS) Microphone Inputs Two 1/4\ Guitar Inputs Gain Control Knobs for Each Channel +48V Phantom Power Switch Mono/Stereo Output Switch MFi Certified Lightning Output Connector for iOS Devices 3.5mm Headphone Output Jack for Monitoring Specifications: Frequency Response: 20 Hz to 20 Khz, +/- 0.5 dB Distortion: Less than 0.01% @ 1 kHz, -30 dBu input Signal to Noise Ratio: 80 dB @ 1 kHz, -30 dBu input Gain: +20 dB to Infinity Power Requirement: One 9V Alkaline or Lithium Dimensions: 4.7 x 1.6 x 1.6\ (12 x 4 x 4cm) Weight: 4.6 oz (130g)