MKHFP ETCR6100 - 0.0A-600A 30 x 35 mm

Specification: Condition: 100% Brand New Item Type: Clamping Gauge Material: abs Product size: approx. 185 x 50 x 31 mm / 7.3 x 2 x 1.2 inches. Weight: approx. 326 g / 11.5 oz. Model : ETCR6100 Jaw size: approx. 30 x 35 mm / 1.2 x 1.4 inches. Distance: DC / AC 0.0A-600A. Accuracy: ± 2% RDG, ± 3% DGT Resolution: 0.1A Data interface: RS232 Working current: 10mA Functions: DC current, AC current measurement, STAY PEAK, Online monitoring Power supply: 6F22 9V dry alkaline battery (not included), continuous use for 15 hours Test method: CT clamp, non-contact measurement Display mode: 4 digits Lcd monitor LCD Size: approx. 32 x 15 mm / 1.3 x 0.6 in. Frequency Response: Interchange: 4 5Hz-400Hz Sampling rate: 2 times / sec. Polarity indication: automatic identification when DC current detection, display '' '' '' Wire Position: The detected wire is in the center of the jaw, and the maximum deviation from the center position is increased. Change: Full automatic switching Line voltage line test below 600V Software: Yes, the data stored in the meter can be loaded to the computer through the software. Data storage 99 groups, flashing ' 'FULL' indicates that the storage is full. PEAK MAINTENANCE: Maximum capture hold function, long press HOLD button during test without release, it will show a maximum value Data control: Data hold function: Display '' DH'' Out of range display: Out of range function: show ''ol'' AUTO SHUT OFF - After 5 minutes of power on, the meter automatically shuts off to reduce battery consumption. Battery voltage: when the battery voltage drops to 7.2V, the low voltage sign of the battery is displayed