Raitron ETCR6800D - 2000A CATⅡ(600V) 68mm

This meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices. Model:ETCR6800D Size of clamp:Φ68mm Range:0.0A~ 2000A DC/AC Accuracy:±2%rdg±3dgt Resolution:0.1A Dimension:224mm×115mm×43mm Data interface:USB Weight:515g Function: Measurement of current, Peak value hold, On- line monitoring Power Supply:Zn- Mn dry battery 6F22 9V, lasting for100hours Test Mode:Clip- on CT, integral mode Display Mode: Four digits LCD display LCD Dimension:35mm×21.5mm； display domain：32mm×15mm Frequency: AC 45Hz~ 400Hz Sampling Rate: 2 times/s Polarity Indication: DC current auto identified and display“—” Test Position: Tested wire in the jaw center; Error will increase to 1.5% rdg max if deviate the center Range Shift:Automatically Line Voltage:AC600V Software: with the software the data can upload to computer Data Memory:99units, FULL blinks when the memory is full Peak Hold: Push HOLD without release, the meter will show the peak value during the pushing period Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V. Then the battery have to be changed Consumption:10mW Temperature and Humidity:-10℃~50℃； Below 80%rh Max error refer to environment:-10℃~0℃,40℃~50℃, Error will increase max to 1%rdg Temperature and Humidity for storage: -10℃~60℃, below 70%rh Insulating Strength:AC2kV/rms. ( between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CATⅢ(600V) Applicable Safety Rules:IEC1010-1、IEC1010-2-032、 Pollution degree 2、 CATⅢ(600V)