Note:
1.This product power from POE, need to connect with a 802.3AF Standard 48V POE Switch.
2.This camera default 3MP & H.265, if your NVR do not support 3MP or H.265, you can change our camera into 1080P (2MP) and H.264.
3.IP camera will create more heat and the case of this camera is small, so after you operate the camera for a while, you will feel the camera is hot. And do not worry, it is normal and safe, hope you can understand.
* High Resolution 3.0 Megapixel 1/3'' CMOS Sensor
* Support POE, reduce the trouble of cable arrangement.
* Have auxiliary power connector, can use like a Non-POE IP camera.
* Support H.265 encode, compare with H.264, transit same quality image only need half of the bandwidth; Record same quality image only need half of the storage;
* Also support H.264 encode, so it can be compatible with both H.264 and H.265 device.
* Support audio function, the camera is equipped with a microphone, more convenient.
* P2P Remote Viewing
* Support Motion detection, Email Alarm function
Camera
Model: I706-P-Audio-FHW
Resolution: 2304 x 1296P 3.0 Mega Pixels
Sensor: FH8852+GC2053
Min illumination: 0.1Lux @(F1.2,AGC ON)
Frame rate: 3MP/20fps
Lens: 3.6mm
O NVIIF compliant: 6688
Compression Format: H.265/H.264
Storage: NVR or Computer
IP address: Dynamic (Default)/Static
Smart alarm: Motion detection, Email alarm
Support protocol: HTTP, TCP/IP, ICMP, RTSP, RTP, RTCP, SMTP, DHCP, DNS, PPPoE, NTP
Ethernet: 10M/100M mbps Ethernet (RJ-45)
Audio
Voltage: DC 12V (9 ~12V)
Current: 20 mA
Frequency Response: 20Hz ~ 20kHz
Sensitivity: -40dB
Signal Output Extent: 2.5Vpp/-25db
General
Operating Temperature: -25°C~60°C
Power Supply: POE
POE Standard: 802.3af
Dimension(cm): 5.3 x 4.5 x 4cm
Weight: 0.2kg
Package contents:
1 x Camera
1 x User Manual (English)
1 x Screws Set