ZAICOLER Phase Tester - Car Lithium Battery Powered

1. [PRECISE AUDIO DETECTION] Easily test left and right channel noise signals and check speaker phases for correct wiring adjustments. 2. [USER-FRIENDLY OPERATION] Simple instructions guide you through the testing process, ensuring accurate results every time. 3. [ENHANCE SOUND PERFOR fit for MANCE] Fine-tune your car's audio system for harmonious and realistic music playback by verifying correct speaker phase. 4. [BATTERY INDICATOR] Know when to replace the battery with the handy yellow indicator light, keeping your testing sessions uninterrupted. 5. [CONVENIENT PACKAGE] Includes a phase tester and CD for comprehensive testing and troubleshooting of car speakers. Specification: Item Type: Phase Tester Material: ABS Use: The loudspeaker wiring specially for adjusting the car sound system, only the correct wiring, the sound can be replayed truthfully when listening to music, just have the feeling of harmonious and realistic nature. Application: Universal Battery Type: Lithium battery Battery Model: 6F22(shipped without batteries) How to Use: Test disc content: The first segment: left channel noise signal. The second segment: the noise signal of the right channel. The third section: phase test signal. The fourth section: phase test signal. Adjustment of speaker wiring After the sound system is installed, put the test disc into the host first, and adjust the volume output to the appropriate position. Then follow the steps below. Step 1: Select the first and second paragraphs respectively. Check whether the left and right channels are reversed when connected. Step 2: Choose the third or fourth paragraph. Check whether the phase of the left and right channel speakers is correct. Place the front end of the phase meter (with a microphone in the instrument), approach and face the speaker under test, press the power switch of the phase meter, the green light flashes three times and the red light flashes once, indicating that the speaker output is positive phase. The green light flashes once and the red light flashes three times, indicating that the output is negative phase. If the phase is wrong, you can reverse the wiring at both ends of the speaker. The yellow light indicates that the battery of the phase meter is low and needs to be replaced. PackageList: 1 x Phase Tester 1 x CD