WWDZ Steam Mop - 270 Milliliters

Q&A question How long does it take to emit steam after the machine is started Press the steam button the red light flashes for the preheating state the red light is always on for the steam state and the preheating time is about 25 seconds. What status do the different colors of the indicator light correspond to Blue light-standby, green light-wiping mode, red light-steam mode, red light flashing slowly-preheating state, red light flashing fast-water shortage. Can I add water or change the mop when steaming Please install the mop and add water to the water tank before using this product. If you need to replace the mop or add water during use, you need to turn off the machine and unplug it and wait for 2 to 3 minutes, and wait for the machine to cool down completely. Where is the steam port of the machine The steam of this product comes out of the air vent on the sports board. The temperature of the machine is high during use. It is strictly forbidden to approach the sports board by hand or lift the machine to see the air holes. How to use the steam button correctly In the working state, press the steam button, and start to spray steam after 25s of preheating; when the steam button is pressed again, the steam stops. (If the red light flashes, it means that the boiler is preheating. When the red light is on, the preheating is complete) What should I do if the machine does not start 1. Check whether the power cord is powered on; 2. Replace the battery of the handle remote control. What should I do if the machine does not emit steam 1. Check whether the power cord is plugged in tightly; 2. Check if there is water in the water tank; 3. Confirm whether the machine is started (steam will only be sprayed after starting). Under normal circumstances, how long can the water tank be filled with water The maximum capacity of the water tank is 270ml, and the preheated steam can be used continu