TUBBXA DY2015A - 12V Digital Multimeter

DY2015A 12V Digital Multimeter Tools Lead Acid CCA Load Battery Charge Test Battery Teste For Vehicles Trucks Motorcycle Selling Point: Storage battery tester fit for all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery. It is available to vehicle of 12V storage battery. The working voltage of tester is DC 9V to 35V. Do please do not check the series connection battery with the tester. Standard of optional storage battery: CCA: 100-1700; IEC: 100-1000; EN:100-1700 DIN:100-1000; JIS: need to compare CCA with a table(the table is included in user manual). Generally,battery standard was marked on battery body. In case there is no mark. Package include: 1x Storage battery tester 1x Rubber protect sleeve 1x User manual (in English) 1x Quick guide 1x DIN.EN transcoding table The Product Features FOUR MAIN FUNCTIONS The larger the CCA value of the battery , the internal resistance is generally smaller. Note: Preparation before testing - When the car is started, first turn off the fire and turn the key to the OFF position. The standard voltage is 9.6V. The test result is more than 9.6V,the boot system is normal. (Otherwise,the boot system is abnormal.) Note: Preparation before testing - When the car is started, first turn off the fire and turn the key to the OFF position. If the voltage reading is less than 12.8V (For 24V system <;DY2015A>, the reading is less than 25.60V) Please check whether the generator belt is worn and the wire is short-circuited or not . Note: Preparation before testing - When the car is off, please start the car engine first. If the voltage reading > 15.0V (for 24V system <;DY2015A>, reading > 30.00V), please check the regulator <;13.3V (for 24V system If the voltage reading is DY2015A>, reading > 26.60V), please check the connection point, wires and engine. Note: Preparation before testing - When the car is off, please start the car engine first. MODEI DY2015 DY2015A Battery type Lead- acid battery Battery voltage 12V 12/24V Battery range 100-1700CCA Voltage range DC 9-18V DC 9-35V Battery Internal Resistance 0-99m Battery Status of Health(SOH) 0-100% Battery Status of Charge(SOC) 0-100% Operating temperature -18~50 Operating Language English Testing method 4-wire Kelvin test connection Display Battery Internal Resistance Display ohms Display ohms Display Battery Voltage Display volts Display volts Display Battery condition Good/ok/attention/replace Ah Input Quick Test yes yes Maximum Load Test yes(On car) yes(On car) Engine Cranking Load Test yes yes Star-up Load Test yes yes Maximum Load Test yes yes Charging system Test yes yes Display Battery Status of Health(SOH) yes yes Reverse Polarity Protection yes yes Loose Lead Detection yes yes Overload Protection yes yes Cable Length 700mm Dimension 180*90*32mm