LZFuiop Gasoline Demolition Jack Hammer - 1200W

The shipment will takes about 7-13 working days to reach you. Refueling ratio : 1. Mixing method: After adding gasoline and engine oil separately, cover the oil pot lid and shake it evenly to use. 2. Mixing ratio: 25:1 3. Add two-stroke special oil, be sure to use two-stroke engine oil, absolutely can not use four-stroke engine oil or other engine oil, otherwise it will lead to other problems such as pulling the cylinder. Startup steps: 1.Before each start, you need to press the oil bubble to supply oil, and press the button to suck the oil into the oil pipe. 2.Push up to open the damper. 3.Pull the handle and pull it 5-8 times. When you hear the sound of ignition, push the damper back. 4.Close the damper and pull the start handle again. It can be started normally after 1-3 times. Features: 1.Removable drill bit: easy to disassemble, durable in use, can be used in place of other drill bits. 2.Adjustment knob design: adjustment knob design, hammer mode can be easily switched at any time, more convenient at work. 3.Auxiliary handle: Silicone non-slip handle, the auxiliary handle is more convenient when working. 4.Lubricating oil addition: Regularly add lubricating oil to ensure strong power. 5.Easy to start system: pull rope spring type inertia start, easy to operate. 6.Handle: Comfortable grip, silicone non-slip handle. The throttle switch and the flameout switch are designed for easy operation. Applicable: quarry, water and electricity installation, road demolition, wall demolition. Parameters: Engine type: single cylinder, air cooling, two stroke Fuel: gasoline and two-stroke engine oil Fuel tank capacity: 0.9L Power: 1200W Displacement: 32.7cc No-load speed: 400 rev / min Number of hammers: 3200 times / min Net weight: 12kg Maximum drill diameter: 40mm Specification: 600X240X240mm