GZDcjsc Gasoline Hammer - 1900W

Product Engine displacement: 52CC Mixing ratio: 25:1 (gasoline: oil) Fuel tank capacity: 1.3L Impact frequency: 1500BPM Engine power: 1900W Impact power: 20-65J Steps to install the chuck 1.Put in the pick. 2.Rotate the latch to lock the pick. 3.Check whether it is installed in place. FEATURES Pull Starter: Lay the machine flat on the ground, hold the operating handle in one hand, quickly pull the opener handle 50cm with the other hand, slowly loosen it to 20cm, then quickly pull the opener handle 50cm, repeat this operation until the engine starts . Gasoline: 90# and above are ok, after adding pure gasoline to the fuel tank, cover the oiler lid and shake it evenly. Engine oil: Two-stroke engine oil must be used, other engine oils cannot be used, otherwise it will easily cause cylinder pulling or other problems. Gasoline: Oil=25:1 ACCESSORIES pointed chisel*1 flat chisel*1 square shovel*1 pointed shovel*1 long shovel*1 wide shovel*1 ramming plate*1