LIROPAU Limpiador a Vapor - 5 bar 2L

Specifications: Steam Cleaner Capacity: 2.1 L Water Tank Material: 304 Stainless Steel Rated voltage: 220 V, 50 Hz. Maximum pressure: 5 bar / 5 kg. Power cable length: 3 m Output power: 2000 W Outlet hose length: 2 m Warm-up time: 3-8 minutes Working time: approx. 60 minutes Unit dimensions: 41 x 35.5 x 27.5 cm Package Dimensions :42 cm x 36 cm x 27 cm Gross weight: 6.2 kg Package Content: 1 x Steam Cleaner 1 x floor brush. 3 x Floor Cleaning Cloths 1 x Glass scraper. 1 x ironing brush. 3 x Small Round Brushes 1 x Copper Wire Brush 2 x High Pressure Nozzles 1 x pump. 1 x Floor Brush Connector 1 x Rotating brush. 1 x Funnel 3 x Towel Covers 1 x Sealing Gasket 1 x Measuring cup. 1 x Steaming Brush 1 x ironing brush. 3 x Extension Tubes 1 x Storage Clip Note: During the cooling phase, condensation may build up inside the hose. Therefore, when turning the unit back on, it is possible that a small amount of water will initially be expelled. This is completely normal and should not be a cause for concern. Fill the water tank to a maximum of 90% of its capacity (1.8 L). If overfilled, the initial steam may become more wet, but it will stabilize after 5-10 minutes. Allow the device to preheat completely before use, until the indicator light changes from orange to green.