Keenso f8ip2cxaeo - 1080P

1. [INCIDENT-PROOF PROTECTION] Provide evidence in case of accidents with clear 1080P resolution videos. 2. [PEACE OF MIND] Guard your vehicle with 24-hour parking monitoring to ensure constant surveillance. 3. [CUSTOMIZABLE INSTALLATION] Choose between two rear camera installation methods for personalized setup. 4. [OPTIMAL ANGLE] Adjust the lens position for the best view and coverage of your surroundings. 5. [EFFORTLESS SETUP] Insert the memory card, affix the cameras, and power the unit with the car charger for immediate use. Spec: Item Type: Dual Dash Cam Material: Plastic, Metal Display: HD display Wide Angle: 170 Degrees File Format: AVI Video Resolution: Maximum 1080P Video Format: MOV, AVI Loop Recording: Seamless loop recording without missing seconds On bOard Switch: Support the car to turn on the ignition and turn off the ignition Motion Detection Function: Support Year, Month, Day: Support Camera : 5 million Photo Format: JPEG Memory Card: Memory card (maximum support 32GB, not included) Pull Back Camera: Support Parking Monitoring: Support Microphone: Support Built in aUdio: Support Video Format: PAL / NTSC Battery Type: Built in lithium battery, 300mAh Rear Lens Length: Approx. 6m/20ft How to Use: 1. Please test that the rear view camera is normal before installing it (if there is a rear view camera, it can be ignored). 2. Turn off the car engine. 3. Insert the memory card into the card slot of the recorder. [Note] Please use a high speed memory card (Class10 or above), the capacity is not less than 4GB, and the memory card supports a maximum of 32GB. Fix the recorder on the front windshield of the car through the bracket. Insert the car charger into the car cigarette lighter. [Note] When wiring, the charging extension cable can be laid along the edge of the car door frame and under the carpet in the car. 6. Install the rear camera at the rear of the vehicle, pay attention to the up and down direction when installing, and the wiring can be buried along the edge of the vehicle roof. [Note] There are two installation methods for the rear camera: A. It is adsorbed on the rear glass of the car and can be installed by yourself (the visual function of reversing cannot be realized, and only the video behind the car can be recorded in real time); Find a professional installer to install it above the license plate frame, and the camera needs to be connected to the power supply of the reversing light (reversing visual function can be realized). 7. Adjust the lens position to ensure the best angle. 8. Start the engine and check that the machine is functioning properly. PackageList: 1 x Front Camera 1 x Rear Camera 1 x Rear Camera Power Cord 1 x Car Charger 1 x Suction Cup 1 x Double Sided Tape 2 x Screw 1 x Manual