EMUKOEP Clamp Leak Tester - 60.0A 7mm

Specification

• Item Type: Leak Tester
• Material: ABS

Models

• Measurement Function: AC and DC leak , measuring
• Operating Power Supply: 6F22 9Vx1(Not Included)
• Test Method: Clamp CT, non-contact measurement
• Jaw Size: Φ7mm
• Range: 0mA~60.0A AC/DC
• Resolution: 1mA AC/DC
• Accuracy: ±2%rdg±5dgt (under 23°±5°C, 75% relative humidity)
• Display Mode: 4 digits LCD display
• Sampling Rate: 2 times per sec
• Frequency Response: AC 45Hz~400Hz
• Polarity Indicator: Auto recognition when DC is detected, displays the "-" sign.
• Wire Position: The wire to be detected is in the center of the jaws
• Shift: Fully automatic switching
• Line Voltage: 600V and underline test
• USB Interface: Data stored by the USB interface can be loaded, saved and printed on the computer.
• Communication Parameters: Baud speed 9600, data bit 8, stop bit 1, NO accompanying bit
• Support Functions: Data storage, overflow display, automatic shutdown, battery voltage.
• Working: 10mA
• Operating Temperature and Humidity: -10°C~50°C; below 80% relative humidity
• Limit Temperature Error: -10°C~0°C and 40°C~50°C, the maximum error increases by 2%
• Storage Temperature and Humidity: -10°C~60°C; below 70% relative humidity
• Insulation power: AC 3700V/rms (between core and box)

How to Use

Take the product, open the back cover with a tool, install the battery, you can adjust the user measuring range, and then use the measurement. Right button is used for zero setting which provides enhanced anti-interference and better calibration to zero. HOLD is data retention switch. It is very convenient to measure by simply inserting the wire on the jaws.

packing list

• 1 x AC/DC Leakage Meter (Battery Not Included)
• 1 x CD
• 1 x USB Data Cable
• 1 x Manual
• 1 x Bag