AAABOX Display Case - 40 x 20 x 30 cm 3 mm Acrylic Transparent Dustproof

How do I install display case?

1. Before installation, please remove the protective film on both sides of the panel and the base.
2. Locate the top plate and connect the triangular connector to the top plate.
3. Install all four corners of the top panel
4. Find the four-sided panel and install it. Pay attention to the right direction.
5. Locate the L connector and install it. (Use the L connector to connect the middle or bottom of the panel)
6. Turn it over and put it in the black base, it's done.

Tips:

1. Why is my display case blurred?

The panel and base have a protective film to prevent scratches. Please remove the protective film before installation. Wear gloves during installation.

2. Why can't I complete the installation? Does the hole of the plug match the hole of the box?

The linker is installed in the display case, please do not install it outside the case.

3. How do I use rivets correctly?

Insert the rivet sleeve into the rivet, align the connection hole with the plate hole, align the rivet with the hole and press it in by hand.

4. How do I use the linker correctly?

Place the linker in the display case and align the holes with the panel holes. Use triangular linkers for the top four corners and L-linkers for other positions

The package includes: 5 transparent plates and 1 10 mm thick black base, a package of installation parts, gloves, scraper and installation instructions.