XYG-Raspberry Pi 7inch HDMI LCD - 7 Inches 1024x600

Features 7inch IPS screen, 1024x600 hardware resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Multi-languages OSD menu, for power management, brightness adjustment, contrast adjustment, etc. Supports 100-level backlight adjustment FAQ Why the LCD doesn't work with my Raspbian * To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. * However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the provided image * Make sure the hardware connection is correct and connects fine. * Make sure the image in TF card is burnt correctly. * The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Which power supply should I use * It is strongly recommended to use a stand-alone 5V/3A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD. Package Contains 7inch HDMI LCD x 1 HDMI connector x 1 HDMI to micro HDMI connector x1 Touch pen x 1 RPi screws pack (4pcs) x 1 Quick start sheet x1 For more details you may need to know, pls firstly send me message via Amazon, I will then send attached link including User Guide for you, thank you for patience.;D