iCreatin Gigabit POE Injector - 24V 18W 2 ports

Used to provide PoE power to: Mikrotik and Ubiquiti and OM2P Access points Do not use for UBNT AC lite Ubiquiti Aircam cameras Tranzeo and other 24v devices Do NOT work 802.3af deivce, if your devices spec 802.3af - please see our 48v products: https://www.amazon.com/dp/B00NRGJCM6 Note: This PoE injector only used for 10/100Mbps network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCREAT PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 1000mA and high voltages exceeding 25Vdc. Specifications 2 RJ45 Ethernet ports 24V 24W power output, Power feed: V+ 4,5; V- 7,8; Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input What in Box? 1 x US wallmount PoE injector