Fabater Print Camera - 57 x 25mm

1.4 inch display: It has a clear 2.4 -inch display for simple photo display and manipulation. It enables an immediate photo truck that offers the of seeing printed memories immediately. 2. Integrated flash: With a built -in flash, this camera ensures that your photos are alive and even in poor lighting conditions. Thanks to the provision of abundant lighting, you can capture important moments without worrying about poor lighting conditions and offering flexibility in various environments. 3. Pointed lens: It is equipped with both the front and rear 1MP cameras, which enables regular photography and simple selfies. This double lens -setup increases the flexibility of the camera and lets the users switch seamlessly between different photographer modes. Ven. It ensures that you can capture a wealth of beautiful moments without leaving space. 5. Thermal pressure: The camera uses thermal printing technology and enables an ink - photo pressure on heat paper. This method simplifies the printing process while it is environmentally conscious. Technical dataification: Article type: Immediate printing camera Material: ABS Weight: approx. 535g / 18.9oz Storage media: 32 GB small memory card, sent with a small memory card (installed) LCD size: 2.4 -BCH -IPS -HD screen Pixel area: front and back camera: 1MP Battery (installed): Li -akku 1300mAh Function: Photo Button and interface function Introduction: 1. On / off switch can be switched on by Long Press. 2. button for the closure release 1) confirm the key; 2) Tap this button to record photos or video in the interface between photo and video mode. Long press for switching from the front and rear lens; 3) Click to play and pause music in the music . 4) Click here to play the video and pause 3. Print key 1) Click in the photo center to open and close the pressure. (In the state of charge, cannot print) 2) Click in the music interface to open and close the music list. 3) Tap Switch filters in video mode. 4) Music interface click click to switch to the next song 4. Click the button to return to the previous level. 5. Left click 1) Selection key to the left and top; 2) Click under the photo box to switch between continuous photography, timing, timing 5 plus continuous taking, filter, effect, photo frame. long press to zoom in; 3) Under the video recording interface press short press short to change filters. 4) Click the music interface to switch to the previous song. 6. Right click 1) selection key on the right and off; 2) Click under the photo box to switch between continuous photography, timer, timer 5 plus continuous photography, filter, effect, photo frame. Long press to narrow down the . 7. Album key, video or photo interface under the main interface click to quickly enter the album interface. 8. Menu key 1) Click the light mode under the photo option to open the flash. 2) Click the video recording interface to open and close the filling light mode. 3) Tap under the album and the music interface to tap the function of deletion. 4) Tap under the main interface to quickly enter the menu settings. 9. Ladeport 1) Sectional type: Type C; 2) to connect to an external power source for loading the battery or providing work performance; 3) to connect to a PC; If there is a memory card in the device, you can display files on a PC. If the device is not connected, the device is used as a PC camera. 10. Reset button If the machine has a start screen, an abnormal death, etc., the machine forces the machine to shut down. 11. Expression, paper box 1) Print Photo Thermal paper outlet; 2) Placement of paper. How to use: Potor switch: Press the power switch for 2 seconds to switch on or off the device. Packfelist: 1 x pressure camera (installed a roll with printing paper) 4 roll x printing paper 1 x charging cable 1 x lanyard 1 x operating instructions Observe: Do not use excessive power when replacing the printing paper to avoid damage to the machine.