Yitre Exterior Reversing Camera - Night vision 300,000 pixels

1. Ultra‑high‑definition screen, accurate colors, eliminate blind spots, and help avoid obstacles. Provide drivers with a clear picture and show the most ideal road conditions. 2. The 4 LED super bright light illuminates the image when the light is insufficient, and greatly enhances the night vision ability. When you activate reverse gear, the sensor will automatically turn on the light. 3. Suitable for most 12V‑24V vehicles. The camera will be protected from strong currents from any direction, such as rain and car washing, and will work well in extreme weather. 4. Adjustable vertical viewing angle, allowing you to adjust the camera to the most suitable position for you, effectively reducing the accident rate. 5. The camera can be installed on the license plate frame or on the back, front and side according to your preferences. The camera or its mounting bracket will not take up much space on your license plate. Specification: Item Type: Rear View Camera Material: ABS Voltage: 12V Photosensitive Chip: Imported Chip CMOS Video Format: NTSC Effective Pixels: 300,000 Photosensitive Area: Approx. 4.08mmx3.12mm/0.16x0.12in Resolution: 420TV Lines Minimum Illumination 0.1Lux Trapezoidal Electronic Ruler Function: Support Video Output: 1.0vp-P, 75Ohm Power Consumption: to Noise Ratio: Greater Than 48dB Electronic Shutter (N)1/60-1/100000 (P)1/50-1/100000 Working Voltage: DC 12V Working Temperature: -20 to +80 RH95% Maximum Viewing Angle: 140° Low illumination CMOS professional video processing technology How to Use: 1. Take out the license plate light2. Pass the rear view lens wiring harness through the position of the license plate lamp3. Use snaps to install4. Connect the power cord5. Connecting the line6. Install the wiring to the car dashboard7. Connect the extension cable to the monitor Package List: 1 x Rear View Camera 2 x Screw 2