GE KS31 - WHITE Nintendo Switch Switch Lite Nintendo Switch OLED

Supported Platforms: Nintendo Switch, Switch Lite, Nintendo Switch OLED Package Content: 1 x Wireless Controller, 1 x USB Type-C Cable, 1 x User Manual Connection mode: Methode1: Insert the slide rail into the host for use, and pull out the slide rail to automatically connect the Bluetooth back to the host. Methode2: In the off state, press pair key for 3 seconds to pair. Short press the home / capture key to connect back. Turbo Continuous Function There are three ways to cycle: 1. Press the turbo key + X key (for the first time) and press and hold the key to send continuously manually 2. Press the turbo key + X key (the second time) without pressing and holding the automatic continuous transmission 3. Press turbo + X (the third time) to cancel the continuous sending function Adjust the continuous firing speed: Left handle: Turbo +(-) key, adjust turbo speed, set successful vibration prompt, 3 gears in total: 5Hz,12Hz,20Hz (cycle) adjust gear Right handle: Turbo +() key, adjust turbo speed, set successful vibration prompt, 3 gears in total:5Hz,12Hz,20Hz (cycle) adjust gear Motor vibration regulation Left handle: 1." T "+" left rocker up" increases motor motion 2." T "+" rocker down " decreases motor motion Right handle: 1." T "+" right rocker up" increases motor motion 2." T "+" rocker down " decreases motor motion After successful adjustment, the motor of this gear vibrates for 0.5 seconds. Charge Shutdown Charging → Led 4 lights flash slowly Fully charged → The fourth LED is on for a long time Lighting control instructions A. T +L3(rocker click down) sequence: blue, red, green, yellow, green, orange, purple, pink, magic color) light cycle B. T plus L3(rocker double - click down) sequence: color breathing lamp cycle / slide color breathing lamp cycle / turn off light