Betavision Technology HongKong Limited S1 2160P

The Miofive Dash Cam Hardwire Kit is compatible with USB Type-C S1 Series Dash Cams. ⚇ WARM TIPS: 1. Please ensure that the ACC and BAT connections are correct. 2. Feel free to reach out to us if you require any professional assistance. 3. Please use the dedicated hardwire kit designed for Miofive S1 Series Dash Cams, as other brands of hardwire kits are not compatible with Miofive dash cams. 4. The length of this hardwire kit is 11.5ft, suitable for most trucks, SUVs, and other vehicles. 5. Note that installation steps may vary depending on the vehicle model and specific conditions. It is strongly recommended to consult the vehicle manual or seek professional assistance before installation. ☀ INSTALLATION INSTRUCTIONS: 1. Ensure that everything is prepared and safety measures are in place before installation. 2. Locate the car's fuse box, typically found under the dashboard on the driver's side or in the engine compartment. 3. Identify the ACC (Accessory) fuse slot in the fuse box, which provides power when the ignition is on. Also, locate the constant power fuse slot, which provides power even when the ignition is off. 4. Connect the red wire from the hardwire kit to the ACC fuse slot and the yellow wire to the constant power fuse slot. You can use a fuse tap or a fuse adapter for these connections. 5. Find a suitable grounding point near the fuse box, ideally, a metal surface securely connected to the vehicle's chassis. 6. Connect the black wire from the hardwire kit to the grounding point using a ring terminal or a suitable grounding connector. 7. Once all connections are secure, neatly tuck away any excess wires, ensuring they are safely routed to avoid interference with the vehicle's controls. 8. Test the hardwire kit by turning on the ignition. The dash cam should receive power and start functioning.