WPL GK61 - US Wired/Wireless

Package Included Case + Feet + Stabilizers + GK61 Hot Swap PCB + Plate + USB Cable + Switch Removal Tool Bluetooth edition has an 750mAh volume battery inside exlude the items above Attention Pls take the PCB out onto the desk and then plug switches in if you don't have any soldering tool.Or you may pull the hot socket off sometimes. After inserting switches,if some key not act,check the hot socket whether it's loose,and switch pin whether it's bent. Details The plastic case is ABS amoulded. Pls note: This pcb is fully programmable,however Fn sits at the right of bottom row and place can't change. The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB. PCB has RGB presoldered,it's under per switch.PCB RGB can support by music. Bluetooth option is bluetooth 3.0,uses broadcom bluetooth chip and program which is more stable even than some 4.0 in the market.You can switch wired and bluetooth mode with Fn+Spc,enter into pairing mode by Fn+ZXC,can connect 3 device at most. Bluetooth option RAlt ZXC Space key led is related to bluetooth mode,such as when battery volume is low,Ralt led will change color.So if these led color is different from other leds,it's not broken. Bluetooth stand by time is around 10 days,if you use it without led,it can last around 6-8 days,if you use it with leds,it last around 2-4 days.The battery will charge in auto when you insert USB to PC or charger when the capacity is under 90%. There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in is ok,no need soldering again. PCB is programmable with the software below (Can download on official website) drive.google.com/open?id=1G2I4yGU7CuM0NzQm1D8HHpyblukVzfgz