Zeenyi H180 - 600W 95L/H

The application range of flame polishing machine 1 acrylic handicraft products 2 organic glass flame polishing Experimental demonstration of water electrolysis to produce hydrogen oxygen 3 primary and middle schools Product features we at preferential prices, excellent quality, user-friendly equipment operation, quality of service, has won the praise of customers, meet your needs is our biggest wish! Life 1, polishing machine in 3 years or more timely water, if it is found that the liquid level indicating decreased significantly, it is required to timely water (without electrolytic powder). 2, the current was significantly reduced, amount of filling electrolytic powder. 3, for the first time after use, usually only need "1, 2" work, electrolyte for about 3 months found that dirty black or mixed with failure when the need to update a, for electrolyte, please put the machine inverted released electrolyte, liquid discharge should be washed after electrolytic tank, and then re filling electrolytic liquid. 4, add water and change the water and power supply should be closed flame G-u-n, slowly unscrew nut with distilled water until no more than "high scale" not less than "low scale" position, tighten the nut reboot. As water will cause the flame yellow 5, hose, should be timely discharged. 6 storage tank of , should not exceed the tank mouth, if beyond the timely unscrew the tank pour off the excess . 7, check the hose connection place can not leak. 8, pay attention to the electrolyte is alkaline, such as accidental contamination please rinse with water. 9, after the boot if not bleed, the pressure indication is about 0.1MPA, the current indicator back to zero, does not start, that the machine does not leak, such as deflate the use, the pressure is reduced, the current back to normal, the machine. 10, such as the emergence of tempering implosion phenom