YNSDILS Rotatory Car Polisher - 1200W 180mm

Usage: ·Shake well and apply 4-5 drops of Premium Polish to the wool pad. ·Prime pad with Pad Conditioner. ·Dab product out evenly across 2' x 2' section. ·Turn on the machine on surface, start with setting 1 to spread the polish. ·Increase speed and using moderate pressure. ·Operate within the working area 2-3 times until the polish is consumed. ·Remove residue with a clean microfiber towel. Packing list: Option 1: 1 x Polisher 1 x Self-adhesive Disk 1 x Wrench 1 x Side handle 1 x Wool pad 1 x Waxing Flat pad 1 x Box Option 2: 1 x Polisher 1 x Self-adhesive Disks 1 x Wrench 1 x Side Handle 1 x Wool Pads 2 x 7~8" Microfiber Bonnets 2 x 7~8" Cotton Bonnets 2 x 7~8"Wool Bonnets Option 3: 1 x Polisher 2 x Self-adhesive Disks 1 x Wrench 1 x Side handle 2 x Wool pads 3 x Waxing Flat Pads 1 x Polishing Wavy Pad 2 x 7~8" Microfiber Bonnets 2 x 7~8" Cotton Bonnets 2 x 7~8"Wool Bonnets Instructions: The microfiber bonnet is used for applying wax. The non-woven fabric bonnet is used for applying wax. The wool bonnet is used for polishing. The wool pad is used for removing slight scratches. The flat orange pad is used for allowing the wax to be absorbed by the paint. The wave orange pad is used for wiping the wax evenly. When you use the bonnet,it should be covered on an orange pad. Tips: Cleaning The power tool's air inlets should be cleaned after use to safeguard good air circulation. After each use, the machine should be cleaned using a soft, damp cloth. Never use solvents such as alcohol or petrol. These could damage the plastic parts. Technical Support You can address minor faults by yourself and use the following overview: ·The power tool is not working: -Check whether the indicated on the model plate corresponds with the