Tixiyu YDE 4921 - 20000rpm Zinc Alloy

1. [EFFICIENT USE] This air drill operates at a high speed of 20,000 rpm, ensuring stable and efficient performance. 2. [ERGONOMIC DESIGN] Zinc alloy body and comfortable handle with a red protective cover make operation easy and convenient. 3. [LOW NOISE] The pneumatic drilling tool has exhaust vents on the back and an air inlet filter for reduced working noise. 4. [STRAIGHT DESIGN] Simplify operation in corners and tight spaces with the straight design for safe and reliable drilling. 5. [PORTABLE] With its lightweight and compact size, this air drill is easy to carry and suitable for outdoor use. Specification: Item Type: Air Drill Model: YDE 4921 Material: Zinc Alloy Collet Size: Approx. 10mm / 0.39 inch No-load speed: 20,000 RPM Collet thread: 3/8 inch 24unf Air pressure: 90 psi 6.3 kg/cm² Air consumption: 4.0 cfm Air inlet: 1/4 inch Product length: approx. 185mm/7.28 inch How to use: 1. Before and after daily use, please inject 2-3ml of No. 60 pneumatic lubricating oil from the air inlet.2. After adding oil, let the machine idle for a few seconds.3. Generally, the air source compressed by the traditional air compressor contains water and lubricating oil in the air compressor, which is brought out by the air compressor piston. If the oil-water separator is not used, water and oil will enter the pneumatic tool with air, causing the Vane/Wing to get stuck. Once the tool is started, the Vane/Wing will no longer stretch and may not even start. If it can be started, the torsion is not enough. Be sure to add fuel regularly to maintain the normal torsion of the tool. List of packages: 1 x Air Drill 1 x Wrench 1 x Air Inlet