Tixiyu lzgn9w8uja - Approx. 180cm / 70.9in 120 Degrees Diffused Lighting

1. [BRIGHT AND EFFICIENT] With 252 LED lamp beads and 18W power, this underwater light delivers 2500LM of luminous flux for optimal brightness and energy efficiency. 2. [IP68 WATERPROOF] Designed with ultra-high waterproof technology, this landscape light is resistant to moisture and corrosion, ensuring long-lasting performance. 3. [ MATERIAL] Made of high-quality PC+ABS+ resin, this light is built to last and withstand the elements, providing reliable and consistent lighting. 4. [EASY TO CONTROL] Use the remote control to easily switch colors, adjust modes, and turn the light on/off for a hassle-free and customizable lighting experience. 5. [WIDE APPLICATION] Ideal for swimming pools, courtyards, gardens, and more, this pool light adds a colorful and playful ambiance to any outdoor space. Spec: Item Type: Underwater Light Material: PC+ABS+Resin Weight: Approx. 1188g / 41.9oz Diameter: Approx. 26.2cm / 10.3in Height: Approx. 4.3cm / 1.7in Cable Length: Approx. 180cm / 70.9in Craft: The inside of the lamp body is used with fully enclosed resin, which is water-proof Battery for Remote Control: 1 x 23A 12V Alkaline Battery (Not included) Voltage: AC12V Power: 18W Color: RGBW Lamp Beads: 2835 SMD Light Chip Number of Lamp Beads: 252LED Luminious Flux: 2500LM Beam Angle: 120 Degrees Diffused Lighting LED Life: 50000h Waterproof Rating: IP68 Installation Notes: 1. Drill 5 holes (four screw holes and one wire hole) on the wall of the swimming pool. Use 4 long screws and 4 expansion screw tubes to install the fixing bracket on the wall of the swimming pool. 2. Pass the 180CM power cord through the wire hole on the wall to facilitate subsequent connection to the power supply 3. Use short screws to fix the lamp on the bracket through the screw holes on the of the product (the area around the fixing bracket must be flat and flush with the of the fixing bracket, which ensures the distance between the lamp and the wall no clearance fit. 4. Disconnect the total current, ensure that the is installed in place, connect the power cord to the AC12V transformer output line, and connect the other end of the transformer to the output power supply 5. Install a 23A 12V alkaline battery in the remote control (not included) 6. Turn on the power, turn on the lights, and complete the installation 7. Pull out the receiving antenna of the remote control to control the light switch, color and mode. PackageList: 1 x Lamp 1 x Light Fixed Bracket 1 x Remote Control( Battery Not Included) 1 x Remote Control Manual 1 x Remote Control Cover 1 x Lamp Manual 4 x Long Screw 1 x Short Screw 4 x Screw Expansion Tube Note: A 12v transformer is required for installation, not included.