TISTIK ETCR6900 - ≤200mm

Specification: Function: AC high current and leakage current measurement; Power source: zinc manganese dry battery 6F22 9V Test method: Flexible CT: The output signal is the differentiation of current to time. By integrating the output voltage signal, the input current can be truly restored Coil inner diameter: inner diameter φ200mm Range: AC 0.00A～9999A Resolution: AC 10mA Accuracy: ±2%±3dgt (the wire is in the center of the flexible coil, 23℃±2℃) Coil length: length 628mm Coil thickness: φ7.5mm (very suitable for narrow environments and densely arranged places, etc.) Frequency of the measured current: 50Hz/60Hz (automatic identification) Instrument size: width, height, thickness 190mm×370mm×40mm LCD size: 35mm×21.5mm; display area: 32mm×15mm Backlight: Backlight, convenient for dim field use Quality: 200g (including battery); Electric field interference: no hysteresis effect, strong anti-interference ability Position error: The wire to be tested should be placed in the center of the flexible coil as much as possible, and not close to the opening and closing opening. The test error at the opening and closing opening is approximately doubled or more. Sampling rate: 2 times/sec Data storage: 99 groups, flashing "FULL" symbol indicates that the storage is full Peak hold: Peak capture hold function, long press POWER during the test without letting go to display the peak value, and the "" symbol will display Data retention: data retention function: "DH" symbol display Line voltage: line test below AC600V Overflow display: over-range overflow function: "OL" symbol display Battery voltage: When the battery voltage drops to about 7.2V, the battery voltage low symbol is displayed to remind you to replace the battery. Rated current: about 8mA Working temperature and humidity: -10℃～40℃; below 80%rh Storage temperature and humidity: -1