TINTAG E47169 - 980W Multifunction

Specification 1. Name: Electric drill 2. Model: E47169 3. Material: ABS+Alloy 4. Color: Black 5. Rated Power: 980W 6. Speed: 0-3000rpm Installation of Drill Bit 1. Turn counterclockwise with a wrench to half-open. 2. Insert the fitting to the bottom and tighten clockwise. 3. All three holes need to be tightened. Installation of Angle Grinder 1. Use a wrench to chuck counterclockwise. 2. Twist to half open. 3. Insert the cutting connecting rod and tighten clockwise with a wrench. 4. Insert the black gasket. 5. Load the cutting blade. 6. Fix with white screws. 7. Tighten with a wrench. 8. Install a protective cover before installing the cutting blades to increase operational safety Replacement of Carbon Brush 1. Take out the carbon brush box, place the built-in iron sheet flatly. 2. Replace with new carbon brush. 3. Press and hold the carbon brush and return it to its original position. 4. Both the left and right carbon brushes need to be replaced. 5. Finally, screw off the cover with a screwdriver.