ThePoEstore Gigabit Power-over-Ethernet Extender - 60W 4 RJ-45 10/100/1000 Mbps IEEE802.3af/at/bt

Description No. of channels: 1(PoE IN) into 4(PoE OUT) Pass Through Data Rates: 10/100/1000 Mbps half/full duplex Connectors: Shielded RJ-45, EIA 568A and 568B Network cables: Shielded category 5 (or higher) Dimensions: 4.68 x 3.35 x 1.10(in) Mounting: Wall of shelf Environment: Indoor or Outdoor Operating Ambient Temperature:-10 to 45 ℃ Operating Humidity: Maximum 90%, Non-condensing Storage Temperature: -30 to 70 ℃ Storage Humidity: Maximum 95%, Non-condensing Regulatory Compliance: IEEE 802.3af (15.4W) IEEE 802.3at (30W) IEEE802.3at 4Pairs(60W) Ethernet and PoE connections both restrict cable distances to 100 meters between network ports.To overcome this distance limit, network installers can simply connect an PoE Extender in-line with the Cat-5e or Cat-6 calbe. With Gigabt PoE Extender, PDs (such as IP Security Cameras,VoIP telephones, wireless access points) can be installed at greater distances than 100 meters from one another. By connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to 200 meters, depending on PDs power required and power source. Gigabit PoE Extender does not require any additional power supply and the connected PDs is fed by an single PoE switch or mid-span, which simplifies installation.PoE Extender offers Three Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is main-tained.PoE in connection PoE Swith, 12.36 or 45.78 powered support, support IEEE802.3af & at the power supply, PoE out for the supply terminal 4 Gigabit, PoE total power can reach 60w [PoE Switch or PoE Injector need to provide IEEE802.3at 4Pairs(60W) power].