Telituny Non-Contacts Voltage Tester

Specification: Item Type: Voltage Tester Product Material: ABS Power Supply: 1 x Lithium Ion Battery 500mAh (Built in) Charging Method: Type C Interface DC5V Continuity Measurement: If the resistive value of the measured line is less than 500, the built in buzzer will sound, the conduction backlight is red Type DC Voltage Range 4V 40V 400V 600V Resolution 0.001V 0.1V 0.1V 1V Accuracy ±(0.8% reading+2 digits) ±(1.0% reading+2 digits) Input Impedance: 10MΩMaximum Input Voltage: 600V DC (Valid Value) Type AC Voltage (40Hz-1KHz) Range 4V 40V 400V 600V Resolution 0.001V 0.01V 0.1V 1V Accuracy ±(1.0% reading+3 digits) ±(1.2% reading+3 digits) Input Impedance: 10MΩResponse: True Valid ValueMaximum Input Voltage: 600V DC (Valid Value) Type Resistive Value Range 4kΩ 40 KΩ 400KΩ 4MΩ 40MΩ Resolution 0.001kΩ 0.01kΩ 0.01kΩ 0.001MΩ 0.01MΩ Accuracy ±(1.2% reading+3 digits) ±(1.2% reading+5 digits) How to Use: Take out the product and follow the user manual. PackageList: 1 x Multimeter 1 x Charging Cable 1 x Test Pen 1 x 1 x User Manual Note: To avoid personal injury and damage to the instrument caused by electricity shock, users should pay attention to the following security tips. 1. Do not measure any voltage that exceeds the measurement range specified by this instrument. 2. Although there is internal guard circuit in the resistive value measurement range, do not apply high voltage (above 100V) to its input terminals. 3. Check if the test leads are damaged or if there are exposed metal parts. 4. Be cautious of the possibility of electricity shock when measuring voltages exceeding 30VAC or 50VDc. 5. Before measuring current, turn off the power, disconnect the circuit point to be measured, and then power on for measurement. 6. Do not make any measurements or perform any function on the meter while the battery