Specification
- Product Type: Integrated Circuit Meter
- Material: ABS
- Model: -06F
- Battery: 2 x 1.5V AA Battery(Battery Not Included)
Uses: 74HC series, 74LS series, CD4000 series, HEF400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic identification of the most body tube, the definition of the voltage value of the voltage regulator tube, etc. tested.
Test Type: Logic device test, interface drive device test, op-amp, comparison test, transistor identification, voltage regulator voltage test, optocoupler.
How to Use
The panel features 7 buttons, up, down, left, right and Enter and O and P shortcut keys.
The top and down keys are used to adjust the catalog and change the model number, left and right buttons are used to move the cursor left and right to select the item to be replaced. Enter key is used to change the machine and execute test commands. Open the battery back cover, insert 2 AA 1.5V batteries (not included) (battery not included) and then close the battery cover. 2 seconds to enter button to boot long press and Please replace the battery when the battery power is too low. Low voltage will affect the reliability and protection of test results and will automatically shut down.
Power on: press the Enter button for more than 2 seconds to turn on the power.
Closure
Press Enter button in the OFF index to close immediately.
Press Enter key on any string for more than 10 seconds to turn off.
3. It will automatically shut off after 60 seconds without any operation.
Shortcut Key
- O key is quick off key (type 06).
- P key is the backlight key (type 06).
Packing List
- 1 x Tester (Battery Not Included)
- 3 x terminals
- 1 x Manual
- or
- 1 x Tester (Battery Not Included)
- 1 x Manual
