Shot Case Anhui-dsb Car Rear View Camera - Night vision NTSC 512(H)x492(V)

Product size is 4.8cm*3.8cm. Features: · Weatherproof, can be used in car and home. · Support night vision. · CMOS imaging sensor · Support NTSC video system. · High definition and wide viewing angle. · Can be used on a variety of vehicles: car, truck, SUV, van, etc. · Easy to install, you can install the monitor through the mounting bracket or universal bracket. · 5m video cable · It can help avoid accidents and scratches well. Specification: · Image Sensor:1/3" OV Color CMOS · Effective Pixels:NTSC 512(H)x492(V) · Horizontal Resolution:420TVL · Minimum illumination: 1. 0Lux F1. 2 (0Lux with IR on) · Night vision:5-10m · Lens:2.8mm · Diagonal viewing angle:120° optional · Sync: internal sync · Signal-to-noise ratio: >48dB · Signal System:NTSC · Electronic shutter: automatic · Video output: RCA interface, 1.0Vp-p, 75Ohm · White balance: automatic · Backlight compensation: automatic · Power:DC 12V · Current Consumption:50-60mA, Max 130mA with IR operation · Operating Temperature: -20„ƒ~+60„ƒ, RH95% Max. · Storage Temperature: -30„ƒ~+80„ƒ, RH95% Max. Video Cable Length:5m · Power supply cable length:150cm Package Contents: · 1 x Car Rear View Camera · 5m video cable · 1 x 1.5m power cable How to install the camera (for reference only) .Take out your license plate light in the back of your car. . Mount the camera on the place where the stock license plate light was. . Connect the built-in license plate light to the camera where the license plate light is plugged in for power . Connect the power of the camera to your brake lights - the red wire is positive and black is negative. . Connect the video cable to the camera with the extension cord. . Attach the extension cord to your car screen. You will see the pictures when your car is in reverse