Sabrent DS-UTC2 - Dual Bay

The Sabrent DS-UTC2 SATA Docking Station supports the direct insertion of Desktop two 2 5 inches /3 5 inches SATA Hard Drives It is a caseless solution that makes swapping hard drives easier than ever before Plus now you can take advantage of the lightening speed of USB 3 1 to quickly transfer files up to 10 Gbps Connect any 2 5 inches /3 5 inches Serial ATA (SATA) or SATA II Hard Drive to your computer through an available USB 3 1 port on your desktop or laptop Hard Drive Duplicator Function The Sabrent DS-UTC2 Standalone Duplicator Dock can be used to duplicate/clone an existing hard drive without connecting to a computer or simply as external storage to transfer data between a hard drive and your computer Note Your Source Disk must have equal or less Capacity when compared to your Target Disk To use Hard Drive Duplicator Function 1 Insert Both hard drives and identify Source Disk and Target Disk HDD1=Source Disk HDD2=Target Disk 2 Make sure that the USB cable is disconnected from any computer3 Connect power supply and switch on power 4 Press the CLONE button 2 times 5 A Blue LED will flash on 25 percentage indicating that the cloning process has begun6 The cloning process is complete when ALL the lights turn solid Blue (25 percentage -100 percentage )7 Finally press the power switch to the OFF position and eject your drives Note The cloning process can take a couple minutes or up to 4 hours depending on the Files/Disks that are being cloned System requirements Available USB 3 1 for high speed data transfer Reverse compatible with USB 3 0 & USB 2 0 & USB 1 1 Windows 7/8/8 1/10 (Both 32-bit & 64-bit versions) MAC OS X Package Contents Sabrent DS-UTC2 Hard Drive Dock Power Supply USB type-C cable USB type-A cable User Manual