Revotech POE Extender - 48V 12.2W 1 IEEE 802.3af 100Mbps 15.4W

Note: 1. Please don't place any heavy thing on the PoE extender; 2. To prevent the water seeping into the extender, please keep PoE extender away wet environment; 3. Suggest to use PoE extender indoors. When installing the extender in outdoor please install it in a waterproof place. PoE Extender is a cost effective way to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 200m while complying with IEEE PoE and Data standards. The PoE Extender supports 10/100Mbps data rates and delivers 802.3af power levels, up to 15.4W. The PoE Extender does not require local power and is powered via the PoE input. Extended PoE installation range by additional 100m Supports 10/100Mbps data rates - Provides 802.3af power levels when powered by any 802.3at source - Extenders can be cascaded to reach up to 700m - Cost effective installation - no need for local power - Plug and play installation - no configuration needed Other Specification: PoE input: 1 RJ45 port (DC 44-57V) PoE output: 1 RJ45 port (48V) PoE Pin Output: 1/2(+), 3/6(-)； MAX Power 15W Network Medium: Cat5 or better UTP cables (less than 120m) Repeater Mode: Store and forward MAC Address Table: 2K Packet Buffer Memory: 48 Byte Switching Capacity: 400Mbps PoE Standard: IEEE 802.3af Input power: 13 Watts Output power: 12.2 Watts Power Supply Type: 1/2+,3/6-,Mode A, End-Span Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet; Working temperature: -10°c to 45°c Dimension: 75x37x26.5mm Weight: 60g Package contents: 1 x POE Extender 100Mbps (POE5002)