1. BUILT IN MOTOR: High performance motor, easy to finish waxing, polishing and other work without any effort.
2. THREE SPEED ADJUSTABLE: Three speed adjustable, 1000/1200/1600rpm, easy to operate, easy to use.
3. COMPACT AND LIGHTWEIGHT: Compact size, light weight, easy to use. Lightweight and easy to operate, no fatigue even after long time use.
4. LIGHTING FUNCTION: One key switch to turn on the lighting, you can use the polishing machine to work more accurately.
5. POWER DISPLAY: Powered by lithium battery, can be recharged again and again. 4 levels of power display, 25%, 50%, 75%, 100 percent, you can keep abreast of the remaining power consumption in the process of use.
Spec:
Item Type: Cordless Buffer Polisher
Material: ABS
Motor Speed: 20000rpm
Battery Capacity: 2000mAh Lithium Ion Battery ( with Built in Battery)
Input Voltage: USB 5V
Output Voltage: 7.4V
Maximum Power: 37W
Working Discharge Time: 50‑100 Minutes
Charging Time: 5 Hours
Gear Speed: 3 Speeds 1000/1200/1600rpm
Product Size: Approx. 168x160mm / 6.6x6.3in
Polishing: Before Installing, Please Check Whether The Polishing Fleece Cover Is Dry and Make Sure There Is No Solid Particles Attached, If There Is, Please Clean It, Otherwise It Will Damage The Car;
The Black Side Is Attached to The Polishing Disk Hook and Ring, The White Shaggy Fleece Side Is Used to Touch The Car Paint for Polishing.
Usage of Wax: Stain Remover for Stains, Abrasive Wax for Scratches, Polishing Wax for Polish.
Application: Automobiles, Leather Goods, Flooring, Ceramics, Glass, Etc.
Function of The Product: Grinding, Waxing, Polishing
How to Use:
One button to turn it on and use it.Need to know before use:
1. Before each use, fully charge the machine before waxing and polishing, the estimated charging time is 5 hours.
2. The blue indicator light flashes when charging, and all the indicator lights are off when fully charged.
3. Charger selection: please use a genuine cell phone charger, and select the charger labeled "output" parameters ≥ 2000ma (≥ 2A) charging equipment. If the current is insufficient, the device may not be able to charge.
Package List:
1 x Polishing Machine
1 x USB Cable
1 x Wrench
4 x Accessories
1 x Instruction Manual
Note:
1. Waxing disk sponge under pressure deformation depth should not be more than one‑third, press too hard, the machine will be overpressure protection, automatic shutdown, such as re‑use, to re‑press the switch reset, before you can use; waxing is completed and wait for 3‑5 minutes, and then use a towel to wipe off the excess wax (to carry out this step, you can make the back of the polishing work more perfect.)2. All data are measured manually, and there are certain errors in the measurement results.
