Makita DHP490Z

Makita is the leading manufacturer of professional power tools on the market. The DHP490Z is a compact and lightweight cordless Combi Drill, powered by 18V Li-ion LXT slide type battery ,not included,, to supply energy to the powerful 18V brushless motor, with variable speed controlled by trigger and 2 mechanical gears, to deliver 0-1,900 0 0-500 rpm, 0-28,500 / 0-7,500 ipm, 65 Nm maximum torque, 50 Nm maximum torque hard joint, 27 Nm maximum torque soft joint and 460W maximum output power for a wide range of applications. The DHP490Z is ideal for use in confined and narrow spaces, equipped with 3 modes for drilling, hammer drilling and screwdriving, 20 torque settings, 2 mechanical speeds; high speed mode for light duty applications and low speed mode for heavy duty applications, 13mm single sleeve keyless chuck with a 1.5 to 13mm chuck capacity, LED job light with pre-glow and afterglow functions, reverse switch and electric brake. The DHP490Z has a trigger lock function at neutral position. 13mm maximum drilling diameter in masonry, 13mm in steel, 38mm in wood with auger bit, 38mm in wood with self-feeding bit, 51mm in wood with hole saw and 70mm in siding board. The DHP490Z is not compatible with G-Series batteries. 1 year manufacturer warranty with a further 2 years when registered within 30 days of purchase. This guarantee does not apply where non-genuine or recommended parts or accessories are fitted to the tool. The use of non-genuine or compatible batteries and chargers with Makita tools will invalidate the Makita guarantee for our tools.