1. 4G WIFI HOTSPOT: Portable mobile WiFi does not require a broadband connection, just a 3G 4G SIM card to connect to a 4G . It provides extremely fast internet speed for your device even when there is no 4G .
2. 150MBPS HIGH SPEED: Unlocked 4G WiFi supports LTE CAT4 standard with 150Mbps high speed internet access, mainly depending on the signal strength. Supports bands B1/B3/B5/B8 /B38/B39/B40/B41.
3. MAIN FEATURES: Portable WiFi has a SIM card slot and a 3200 mAh battery. It can work with external power supply, no working time limit. It can be charged through computer USB port, car USB charger, power supply.
4. CONNECT UP TO 10 DEVICES: 4G LTE portable WiFi can connect up to 10 devices at the same time, supporting smartphones, tablets, laptops, etc. The effective distance of WiFi can get to 10m/32.8ft.
5. USING METHOD: Please check and confirm that the local operator's frequency band of your microSIM card matches the frequency band supported by this device before purchasing; otherwise, you will not be able to access the Internet.
6. APPLICABLE SCENARIOS: 4G LTE USB WiFi modem is small and lightweight, suitable for party, travel, business trip, work, outdoor live streaming, playing games, car WiFi, etc.
Spec:
Item Type: 4G LTE USB WiFi Modem
Material: ABS
Color: White
Product Size: Approx. 10x6x1.5cm / 3.9x2.4x0.6in
Battery: Lithium Ion Battery (Built In) Capacity: 3200 MA
SMI Card Slot: 1 x SIM Card (Without SIM Card)
Band: B1/B3/B5/B8 /B38/B39/B40/B41
Sharing: Up To 10 Users
Interface: Type C
How to Use:
Remove the product and use it
packing list:
1 x4G LTE USB WiFi Modem
1 x USB Cable
1 x Instruction Manual
Note:
1. Please allow some error due to manual measurement.
2. If WiFi dongle works for a long time, it needs to dissipate heat. Otherwise, it may cause the chip to burn out.
3. Enter the IP address of the router: 192.168.43.1 and click APN Enable. modify the APN. make sure the SIM card is active.
4. Product support band: B1/B3/B5/B8 /B38/B39/B40/B41. The SIM card used must support these frequency bands, and the local signal of these frequency bands can be used normally.
5. The product's battery electrodes are covered with an insulating sticker, which needs to be removed before installing it into the machine and turning it on for use.
6. Please check and confirm that the local operator's frequency band of your microSIM card matches the frequency band supported by this device before purchasing; otherwise, you will not be able to access the Internet.
7. Insert the microSIM card (Requirements for the microSIM card: the Internet access function has been activated; the size should conform to "15mm*12mm"; the PIN code should be off)
8. If you still cannot access the Internet, you need to add APN information (connect to WIFI to enter the management backend for operation, for details, please refer to Points 3 and 5 of the product operation manual).
