KASTWAVE Cell Phone Cooler - Magnetic Semiconductor 20W

Configuring the cooler

1. Download and install the app（Please check the manual for details）

2. Switch on the cooler

Connect the adapter to the cooler through the USB-C cable. Make sure the output power of the adapter is no less than 20W.

1. Turn on the switch to star the cooling back clip

a. Indicator is on: the cooler is working.

b. Indicator is off: the cooler is closed.

c. Once the power is on, the cooler enters Bluetooth pairing mode. If no phone connect to the cooler, the green light will flash for 5~10 seconds, and then the lighting effect will be restored to the user settings or factory Overclocking mode. Bluetooth pairing mode will always be on.

Note: When the cooler is working, the temperature of the device decreases. Then the warm and humid air will condense into water droplets and attach to the surface of the cooler. This is normal.

Magnetic sticker attached to the cell phone will cause your wireless charging function and NFC to not work. Remove the phone case for best results.

Please check the manual for details.