Electrical parameters:
1. Working current: 15mA(RGB Light off), 130mA(RGB Light on)
2. Static current: <10uA
3. Charging current: 260mA
4. Charging hours: ~2.5 hours
5. Battery endurance: 10 hours
6. Battery capacity: 500mAh/3.7V
7. Vibration: Yes
8. Support platform: Android / IOS (MFI) / Tablet / PC / Nintendo Switch / PS3 / PS4
RGB Light
There are 8 different lighting effects: gradual color change, red, green, blue, yellow, cyan, purple, and white. You can change the lighting effect by pressing the light button.
Turbo Function Setting
Action keys ( A / B / X / Y / L / ZL / R / ZR ) also support the turbo function
1. Press and hold Turbo + tap once Action keys to turn on the burst function.
2. Press and hold Turbo + tap once Action keys to set the Auto burst function.
3. Press and hold Turbo + tap once Action keys to clear the turbo function.
Programming function
1. There are two programming buttons on the bottom of the controller, M1 and M2.
2. Each programming button can be used to map a single action button or program multiple buttons(e.g.,A/B/X/Y/L/ZL/R/ZR/L3/R3/Up/Down/Left/Right) can all be programmed.
3. Each programming button can support up to 14 key combinations.
4. The programming buttons do not have TURBO rapid-fire functionality.
5. The programming buttons have a memory function. Regardless of whether the controller is in sleep mode, powered off, or restarted, the controller will remember the last programmed configuration.
Programming Steps:
6. Press and hold the programming button (M1 or M2) and the "MACRO" button for 3 seconds.
The LED indicator 1 or 2 will flash rapidly. Release the buttons to enter programming mode.
7. Press one or multiple regular function buttons (such as pressing one or more keys from"A/B/X/Y/L/ZL/R/ZR/L3/R3/Up/Down/Left/Right" as a combination). Press the corresponding programming button again to confirm and exit, completing the programming.
The mode indicator light will return to its previous state.
8. Press and hold the "MACRO" button and the M1 (or M2) button for 3 seconds. After programming starts, if the M1 (or M2) button is not pressed within 50 seconds, the controller will automatically save the programmed key combination to the M1 (or M2)
button and exit programming mode.
9. After successful programming, the programming button will have the same function as the single or multiple buttons that were programmed.Clearing Programming Function:
10. Simultaneously press and hold the programming button to be cleared (M1 or M2) and the "MACRO" button. The LED indicator 1 or 2 will flash rapidly. Release the buttons.
11. Press the programming button that needs to have its function canceled again to confirm and automatically exit. The mode indicator light will return to its previous state, and the programming function will be cleared.
