FURLOU YDE 3954C - 3/8in 2500rpm

Specification: Item Type: Pneumatic Drill Model: YDE 3954C Material: Zinc Alloy Collet Size: 3/8in (10mm) No Load Speed: 2500rpm Collet Thread: 3/8in 24UNF Pressure: 90psi (6.3kg/cm2) Consumption: 4.0cfm Inlet: 1/4in Overall Length: Approx. 215mm / 8.5in Package List: 1 x Host 1 x Wrench 1 x Intake Port Note: Operation Suggestion: 1. Before and after use every day, please inject 2?3CC of #60 pneumatic lubricating oil (sewing machine oil) from the inlet 2. Let the machine idle for a few seconds after filling with oil 3. Generally, the source compressed by the traditional contains water, and the lubricating oil in the brought out by the aircompressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the , which will cause wind If the blade is stuck, once the tool is started, the blade will not be thrown away, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal torsion.