FURLOU ETCR9330B - 0.00A~9999A 128mm

Function Meter Dimension Detector:210mm×246mm×45mm; Receiver:78mm×165mm×42mm CTSize 128mm Insulation?Rod Size 45mm, Contraction state:?850mm; Stretched state:?3600mm. Insulation?Rod?Voltage?Level 110KV Sampling?Rate 2 times / second MeasurementRange 0.00A~9999A(50/60Hz automatic) Resolution 0.01A Shift 0.00A~9999A automatic shift Test?Accuracy ±2%±5dgt (The wire is near the center of the bottom end of the U-type clamp,23±2) Position?Error The measured conductor should be located as close as possible to the center of the bottom end of the U-type clamp. Data?Storage 99?groups,?in storage process "MEM" symbol display, "FULL" symbol flash display indicate storage is full Line?Voltage Bare wire test below 60kV (Operate?with insulation rod, the telescopic insulation rod is completely opened) Data Hold In general test mode, press?HOLD?key to hold data, "HOLD" symbol display. press?HOLD?Key once again to cancel this function Data?Access "MR" symbol display, it can look over all the stored data Overflow?Display Exceed measurement range overflow function: "OL ?A" symbol display No?Signal?Indication When the receiver has not received transmit signal, dynamic display "no- -"symbol. Automatic?Shutdown 15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption Battery?Voltage When battery voltage is lower than 4.8V, low battery voltage symbol "" display and remind to replace battery.? Weight Detector:300g(with Battery ), Receiver:280g(with Battery ), Total weight: : 2300g (include insulation rod and battery) Working Temperature -10?~ 40; Below?80%Rh Interference Should try to avoid 315MHz, 433MHz same-frequency signal interference Insulation?Strength AC 220kV/rms(The telescopic insula