FREDI HD PLUS WiFi Holder Camera - 32GB 1080P

1. The Camera is Powered by Ac Power, So It Can Be Online for a Long Time. the Camera's Main Control Chip Has a Heat Sink to Ensure Long-term Stable Operation. 2. All AC Output and USB Charging Port Output of the Power Socket Can Be Used Normally. 3. Perform All the Settings of the Camera in the Mobile App, There is No Additional Cost During Use. 4. Just Connect the Camera to 2.4G WiFi and You Can Use Your Phone for Real-time Remote Monitoring Anywhere. 5. The Camera Uses a Specially Designed High-sensitivity, Low-noise Microphone. 6. A 32GB Memory Card Has Been Provided to Record Video. 7. If the Camera is Connected to Wifi, the App on Your Phone Can Play the Video on the Memory Card Remotely. 8. After Setting the Motion Detection Function, when a Moving Object Breaks In, Send an Alert to the Phone. [ Camera Main Parameters ] 1. Camera Resolution: 1080p/720p/640p 2. The Number of Frames: 25 3. The Lens Angle of View: 90 Degrees 4. No IR camera 5. Motion Detection Distance: 16 Feet 6. Compression Format: H.264 7. Installed Memory Card Capacity: 32GB/TF Card 8. Video Recording Mode: Loop Mode 9. Mobile Operating System: IOS/Android/PC

WiFi Remote Connection Steps:

If you want to remotely control and view this camera, you must link the camera with your home wifi network to make it on internet. Just easy 2 steps. Firstly, you need to connect the camera wifi to your cellphone. Secondly, go to the app settings and WLAN to select your home wifi and put in the password. if all the info is correct, the camera will be back online within 2 mins. if you put in the wrong password, the camera will keep staying offline until you reset it and connect it all over again.

Please Kindly Note That:

- This camera does not have IR camera.

- Only work with 2.4GHz WiFi router