Domary YDE 3954C - 3/8in Zinc Alloy 2500rpm

[Versatile Use] : Practical pneumatic straight drill ideal for attaching various tools like drill bits, for long working hours and narrow spaces. [Durable Design] : Made of zinc alloy, lightweight and wear resistant, with a red sheath for safe operation and long-term use. [Efficient Drilling] : 3/8In industrial grade pneumatic deceleration drill, with powerful motor up to 2500rpm for efficient drilling in hard to areas. [Easy Operation] : Convenient air regulator on top for easy speed adjustment, making drilling more labor-saving and efficient. [Reduced Noise] : Rear exhaust muffler design decreases sound levels while intake filters minimize pollution for a quieter working environment. Spec: Item Type: Pneumatic Air Drill Model: YDE 3954C Material: Zinc Alloy Collet Size: 3/8in (10mm) No Load Speed: 2500rpm Collet Thread: 3/8in 24UNF Air Pressure: 90psi (6.3kg/cm²) Air Consumption: 4.0cfm Air Inlet: 1/4in Overall Length: Approx. 215mm / 8.5in Package List: 1 x Host 1 x Wrench 1 x Intake Port Note: Operation Suggestion: 1. Before and after use every day, please inject 2‑3CC of #60 pneumatic lubricating oil (sewing machine oil) from the air inlet 2. Let the machine idle for a few seconds after filling with oil 3. Generally, the air source compressed by the traditional air contains water, and the lubricating oil in the air brought out by the aircompressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the air, which will cause wind If the Vane/Wing is stuck, once the tool is started, the Vane/Wing will not be thrown away, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal