Bulletpoint A-Pillar Device Mount - Wrangler|Gladiator 2018|2019|2020|2021|2022|2023

Looking to securely attach a phone or other device on the A-Pillar Grab Bar of your Wrangler JL or Gladiator? Look no further than the Bulletpoint A-Pillar Grab Bar Mount!

The A-Pillar Grab Bar Mount by Bulletpoint provides an additional rock solid mounting point for a single device on either the driver side or passenger side grab bar (does not work on rear grab bars of 4 door models).

Whether you want to mount a CB radio, handheld radio, action camera, phone holder or switch panel, our aluminum A-Pillar Grab Bar Mount with 20mm Ball is a great solution!

QUICK & EASY INSTALLATION

This ball mount installs on either of the two front A-Pillar grab bars in your Jeep Wrangler or Gladiator. Plus, you can decide to mount it on the top portion or bottom portion of each grab bar. It does not fit rear grab bars.

1. Remove the small top or bottom plastic panel on driver or passenger side grab handle with trim removal tool (not included) — it will not be reused.
2. Using a 10mm socket, remove the bolt – it will not be reused.
3. Set the Bulletpoint A-Pillar Ball Mount in place and secure it by threading the bolt with the included Allen key.
4. Attach your desired device holder to the 20mm ball mount.

FITMENT

• 2018-2023 Jeep Wrangler JL
• 2021-2023 Jeep Wrangler 4xe
• 2020-2023 Jeep Gladiator

Does NOT fit 2024+ Wrangler JL or Gladiator models.

Important: for off-road use only.