BREJSV Diving Flashlight - 56 degrees

Diving Flashlight Light color: White light 5500K / Yellow light 3300K LED life :Over 100.000 hrs Beam distance: about 490 meters Beam angle: about 56 degrees Original XHP70.2 chips, to Max. 4000 Lumen Power consumption Push switch with LED : (green for full capacity and red for lack of capacity) Waterproof: 100M Underwater Waterproof, Durable, lubricated double O-ring seals for twice the security to function under water Reflector: Aluminum Reflector : 7.4v-8.4v Weight: ( 395 g ) (battery not included) Uses: Ideal for diving, camping, hiking, mountaineering, hunting, fishing... Size:Length: 23.9 cm, head diameter: 6.0 cm, shaft diameter:3.8 cm Operation Instruction: The side switch to control all function: Click to open flashlight,high-medium-low-flash (double-click to enter flash mode) Press and hold the switch for 2 seconds to turn off the flashlight Maintenance Tips: 1.You need to tighten the body of the flashlight and the lamp head. 2:Note that the flashlight is very powerful and requires a lot of current. It is recommended to use a power battery, the battery discharge rate can reach 3C/ 5C If your battery current is very small, the white light of the flashlight will not work. 3:Appearance precautions, the flashlight supports the use of a pointed battery,the flat battery cannot touch the circuit board, and the flashlight cannot be used normally 4.Do not shine the light beam directly into eyes. 5.Do not installing the battery reverse polarity. 6.After use you should wash your diving lights thoroughly in fresh water along with the rest of your equipment. 7.Clean,lubricate and inspect the O-rings,that would better for the flashlight's long-term use. 8.Clean the battery and electrical contacts. 9.Store your diving lights without their batteries to prevent any possible corrosion from battery leakage. 10.Always recharge the battery when the light goes dim,