Topping L70 - Fully Balanced NFCA 7500mW x 2

Topping L70 Full Balanced NFCA Headphone Amplifier

🎜L70 is a high-performance desktop headphone amplifier that supports XLR, RCA, TRS input.

🎜High output voltage, high output current, low noise, low output impedance, it is compatible with almost all kinds of headphones.

🎜With 2 gain settings, it covers a wide range of headphones frome low-sensitivity full-sized over-ears to high-sensitivity IEMs.

🎜when multiple devices are used in combination, it can terminate the ground loop noise with setting GND/LIFT switch.

🎜Equipped with a 12V Trigger in & out interface, L70 can be turned on and off synchronously with other device. Product Highlights Headphone amp/Preamp application 4-Pin-XLR + 4.4 balanced + 6.35mm SE output Relay Volume Control: 8 x output mode with volume memory NFCA Modules THD+N <0.000055% DNR 146dB Noise <0.3uVrms Output Impedance <0.1Ω Maximum output power 7500mW x 2 @32Ω, 1150mW x 2 @300Ω Attribute Measured: 20.0cm x 13.8cm x 4.4cm (Include protruding parts) Weight: 800g Power input: 100-240VAC 50Hz/60Hz Gain: L / H Signal input: 1 x XLR (L+R); 1 x RCA (L+R) Headphone Amplifier output: 1 x 6.35 headphone output jack 1 x 4-PIN-XLR headphone output jack 1 x 4.4mm headphone output jack Line Out output: 1 x XLR (L+R); 1 x RCA (L+R) Other interfaces: 12V Trigger In (3.5mm jack); 12V Trigger Out (3.5mm jack) Volume range: 0-99.5 (Volume step 0.5dB) Indicator: White LED Standby power consumption: <1.5W Contents list L70 x 1 Remote control x 1 AC cable x 1 6.35mm to 3.5mm adaptor x 1 User manual x 1 Warranty card x 1