Tihebeyan YDE 3954C - 3/8-inch 2500 rpm

1. Portable design: 3/8-inch pneumatic brake drill in industrial quality with ergonomically shaped body and straight handle, ideal for long working hours. 2. Long -lasting material: The body consists of a zinclegation that is light and wear -resistant, and is wrapped in a red Box/Cover for safe and reliable operation. 3. Noise reduction: The design of the rear exhaust sound absorber reduces the noise level and at the same time ensures that the exhaust does not meet the face of the operator, and the intake filter reduce pollution. 4. For narrow areas: By attaching tools such as drills (not included in the scope of delivery), this pneumatic straight drill is more practical and ideal for drilling in difficult to access and tight areas. 5. High efficiency: The powerful engine with variable speed of up to 2500 rpm makes drilling more efficient and working more, with a practical air regulator at the top for easy operation. Technical data: Article type: Pneumatic compressed air drill Model: YDE 3954C Material: zinclegation Tension tongue size: 3/8 inches (10 mm) Idle speed: 2500 rpm Tensioning thread: 3/8 inches 24unf Air pressure: 90 PSI (6.3 kg/cm²) Air consumption: 4.0 CFM Air intake: 1/4 inches Total length: approx. 215 mm/8.5 inches List of packages: 1 x host 1 x wrench 1 x intake connection A notice: Operation proposal: 1. Please inject 2-3 ml of pneumatic lubricating oil No. 60 (sewing machine oil) from the air inlet every day and after use. 2. Let the machine run open for a few seconds after filling the oil 3. In general, the air source, which is compressed by the conventional air , contains water and the lubricating oil in the air is brought out by the air pistons. If the oil-water separator is not used, water and oil get into the pneumatic tool with the air, which leads to wind. When the Vane/Wing is stuck, the Vane/Wing is not thrown away after the tool starts and may not be able to start evenly. If it can be started, the torsion is not enough. Be sure to refill fuel regularly to maintain the normal torsion of the tool.