BETAFPV Cetus Pro - Brushless Quadcopter Altitude Hold 3 Flight Modes

Please Note There may be some problems when you use the drone due to the operation method. And if the drone occurs to throttle out of control or flight excursion (offset) when you use it, please re-calibrate the drone or email to us. BETAFPV Cetus Pro Brushless Drone with Altitude Hold Self-Protection Emergency Landing Function Turtle Mode 3 Flight Modes Compatible for FPV Beginner Starters Train Player-to-Pilot Positioning system: Optical flow/ Barometer/ Laser Height positioning: Laser/ Barometer Position locating: Optical flow (effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1-2S Pro brushless FC VTX: 25mW Camera tilt degree: 30° Camera: C02 FPV Micro Camera TX mode: Mode 1 & Mode 2 optional Motor: 1102-18000KV Brushless motor Propellers: 40mm 3-blade 1.5mm shaft hole Takeoff weight: 33.19g (without battery) Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 3-5min Flight distance: 80m (in wide & undisturbed environment) Recommended Parts Radio Transmitter -- LiteRadio2 SE Radio Transmitter FPV Goggles -- VR02 FPV Goggles FAQ How can I bind this quad when not using LiteRadio2 SE Transmitter? You can only bind the Cetus Pro quad with radio transmitters that support the Frsky D8 protocol. After binding, you can use AUX 1 to arm and disarm the quad. Using AUX 2 to switch different flight modes, using AUX 3 to switch SLOW/MID/FAST speed, and using AUX 4 to switch FPV frequency. Check detailed binding process in the Cetus Pro quad user manual. Package 1 * Cetus Pro Brushless Quadcopter 2 * BT2.0 450mAh 1S Lipo Battery 1 * BT2.0 Battery Charger and Voltage Tester 1 * Type-C Adapter 1 * Prop Removal Tool 4 * 40mm 3-blade Props 2 * User Manual