ViaGasaFamido Digital Multimeter

1. Multifunctional measurement: This non-test supports AC and DC voltage, resistive value and continuity measure, which corresponds to different electrical measurements in different scenarios 2. Intelligent Design: With automatic material detection and a beach adjustment, this tension tester streamlines business process and provides results without manual shifting 3. Carentent: Lightweight and portable, this voltage tester offers low battery 4. Improved Safety: No voltage tests and line lines for this multimeter can reduce risks, improve the safety and reliability of workplaces, and you can use it with confidence 5. Versatile Applications: With complete functions and intelligent technology, this tensioner is suitable for a variety of applications, making it suitable for home, school, research institution, factory and more Technical data: Item Type: Tension Tension Product material: ABS Food: 1 x lithium battery ion 500 mAh (integrated) Charging method: C DC5V type interface Continuity measure: When the resistant value of the measured line is less than 500. Resolution 0.001V 0.1V 0.1V 1V ± (0.8% reading + 2 digits) ± (1.0% reading + 2 digits) Input impedance: 10mΩmaxim -ing -Voltage: 600V DC (valid value) AC voltage type (40Hz-1kz) 4V 40V 400V 600V Strand 0.01V 0.1V 1V ± (1.0% read + 3 digits) ± (1.2% read + 3 digits) Input impedance: 10mΩ Response: TRUE Valid value Resolution 401 kΩ 400 kΩ 400 kΩ 400 m. 0.01 kΩ 0.01 kΩ 0.001 MΩ 0.01 MΩ ± (1.2% read + 3 digits) ± (1.2% read + 5 digits) In use: Remove the product and follow the user manual. List of packages: 1 x Multimeter 1 x Charging Cable 1 x pin 1 x 1 x User Manual Remark: In order to prevent physical damage and damage to the instrument caused by electric shock, users must pay attention to the following safety advice. 1. Do not measure voltage that exceeds the measurement range specified by this instrument. 2. Although there is an internal safety circuit in the value measuring area, only when the high voltage (greater than 100V) is not at the input terminals. 3. Check whether the test tubes are damaged or have exposed metal parts. v. 5. Turn off the power before measuring the power, connect the circuit to be measured, and then turn on the power for measurement. 6. Do not measure or complete any function on the meter while the battery is plating or under load.