Sorandy Mobile WiFi Hotspot - 4G 802.11ac 150Mbps

1. [FAST 4G HOTSPOT] Enjoy fast internet speeds with LTE CAT4 standard at 150Mbps, no broadband needed. Just insert a 3G/4G SIM card and connect up to 10 devices wirelessly. 2. [PORTABLE & VERSATILE] Take this compact 4G WiFi modem anywhere, with a SIM card slot and 3200mAh battery for long-lasting usage. Charge via USB for convenience. 3. [WIDE COMPATIBILITY] Supports bands B1/B3/B5/B8/B38/B39/B40/B41 for seamless internet access. Check local operator's frequency before purchasing. 4. [MULTI-DEVICE CONNECTIVITY] Connect up to 10 devices simultaneously, such as smartphones, tablets, and laptops, within a 10m range. Stay connected on-the-go! 5. [EASY TO USE] Simply remove the product from the package, insert a microSIM card with the correct frequency band, and enjoy high-speed internet without limitations. Spec: Item Type: 4G LTE USB WiFi Modem Material: ABS Color: White Product Size: Approx. 10x6x1.5cm / 3.9x2.4x0.6in Battery: Lithium Ion Battery (Built In) Capacity: 3200 MA SMI Card Slot: 1 x SIM Card (Without SIM Card) Band: B1/B3/B5/B8 /B38/B39/B40/B41 Sharing: Up To 10 Users Interface: Type C How to Use: Remove the product and use it PackageList: 1 x4G LTE USB WiFi Modem 1 x USB Cable 1 x Instruction Manual Note: 1. Please allow some error due to manual measurement. 2. If WiFi dongle works for a long time, it needs to dissipate heat. Otherwise, it may cause the chip to burn out. 3. Enter the IP address of the router: 192.168.43.1 and click APN Enable. modify the APN. make sure the SIM card is active. 4. Product support band: B1/B3/B5/B8 /B38/B39/B40/B41. The SIM card used must support these frequency bands, and the local signal of these frequency bands can be used normally. 5. The product's battery electrodes are covered with an insulating sticker, which needs to be removed before installing it into the machine and turning it on for use. 6. Please check and confirm that the local operator's frequency band of your microSIM card matches the frequency band supported by this device before purchasing; otherwise, you will not be able to access the Internet. 7. Insert the microSIM card (Requirements for the microSIM card: the Internet access function has been activated; the size should conform to "15mm*12mm"; the PIN code should be off) 8. If you still cannot access the Internet, you need to add APN information (connect to WIFI to enter the management backend for operation, for details, please refer to Points 3 and 5 of the product operation manual).