Power over Ethernet (PoE) type supported: Passive PoE
Antenna type: Internal
Cabling technology: 10/100/1000Base-T(X)
Ethernet LAN data rates: 10, 100Mbit/s
Compliance certificates: CE, Federal Communications Commission (FCC), RoHS
Specifications
Features
Chipset
IPQ-4018
Mean time between failures (MTBF)
100000 h
Internal memory
16 MB
Operating system installed
RouterOS
Processor frequency
716 MHz
Transmitting power (CE)
26 dBm
Product colour
White
Maximum data transfer rate
867 Mbit/s
Placement
Ceiling, Wall
DC voltage range
24 V
Frequency band
2 - 5.5 GHz
Wireless technology
Wi-Fi 5
Maximum data transfer rate (5 GHz)
867 Mbit/s
Maximum data transfer rate (2.4 GHz)
300 Mbit/s
5 GHz
✓
6 GHz
✗
2.4 GHz
✓
Weight & dimensions
Height
42 mm
Width
191 mm
Management features
WPS push button
✓
Power
AC input voltage
17 - 57 V
Power consumption (typical)
11 W
Input current
1.2 A
Power consumption (max)
24 W
Power over Ethernet (PoE)
✓
Power over Ethernet (PoE) type supported
Passive PoE
Computer system
Built-in processor
✓
Processor model
IPQ-4018
Antenna type
Internal
Network
Bluetooth
✗
Security features
IPsec hardware acceleration
Networking standards
IEEE 802.3af, IEEE 802.3at
Cabling technology
10/100/1000Base-T(X)
Ethernet LAN data rates
10, 100
Ports & interfaces
DC-in jack
✓
Ethernet LAN (RJ-45) ports
2
Technical details
Security update term
IPsec hardware acceleration
Compliance certificates
CE, Federal Communications Commission (FCC), RoHS
Memory
Flash memory
128 MB
Product Details
The ceiling AP on steroids! Our bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models, the improved high-gain antenna increases the covered area by up to 100%!
Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.
The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!
The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it, so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc.
Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.